1 5/8" x 15/16" x 1/4"
30 grams
33 Amps Continuous Current
5 to 14 NiCad or NiMH cells
2 to 5 Lithium cells
Switch Mode 5.5 Volt BEC with Max Current of 3A up to 7 Servos
Jeti SPIN controllers give you unprecedented control of the programming for your brushless motors. SPIN controllers can be used in airplanes, sailplanes, helicopters, or 3D helicopters (constant RPM). SPIN controllers can be quickly programmed without a computer; the SPIN BOX is all that is needed. SPIN controllers have a Data Logging function that let you check and fine tune the setup of your airplane or helicopter. Readings for Peak controller temperature, Maximum current, Minimum current, RPM, Motor run time, and many other parameters are recorded and can be viewed right on the SPIN BOX after a flight. This allows you to make adjustments immediately and fly again to see the results. Fine tuning your power system has never been easier.
Pacific Models Will Not Be Held Responsible For Any Specification or
Performance Claims As They Are Those Of The Manufacturer
Copyright © 2004-2012 Pacific Models Inc.
